SALT Sleeves
The SALT Scale is a 3 belt system. It allows for easy attachment via MOLLE to the sleeve or with 1.75 belt loops through the base Raptor™ belt. The MOLLE tabs are held solidly in position with our loop faced liner belt that runs through your pants, which can also be worn as your daily use belt.
Because some users already have a Raptor, Cobra or other base belts, the default is for only the sleeve, unless you select “Add Raptor™ Belt”
If supplying your own Base Belt, keep in mind it must be a few inches longer than your pants size due to the added girth added by being worn over the liner belt.
***IF YOU ARE CLOSE TO TWO SIZES WE RECOMMEND THAT YOU CHOOSE THE SMALLER OF THE TWO***
Base Belt
Raptor™ Belt
The Arbor Raptor™ Belt can be used by itself or with the Sleeve. It is built from a continuous piece of type 13 webbing (7,000 lbs break strength) and an ADF Raptor™ Buckle (18,000 kN break strength MADE IN USA). We fold and sew a segment of the webbing down to 1″ , which creates a soft loop at the furthest forward point for attaching carbines, safety lanyards, and slings. This configuration allows the Core Raptor™ Belt to be strung through pants belt loops and the belt loops on many accessory pouches once the adjustable buckle is removed. The belt has 4 subtle channels that allow for the carry of large zip-ties, which adds a low visibility restraint option and adds additional rigidity to the belt for concealed carry.
LINER Belts
The BIG-G LINER BELT was designed to be the level “0” belt in our SALT Belt System. In addition, it also works perfectly as a daily use belt for EDC or in-uniform. The BIG-G LINER BELT is made from 1.75″ Type 13 webbing, which is stiff enough to support holsters & other items, but soft enough to be comfortable when worn daily. The belt has 4 subtle channels that allow for the carry of large zip-ties, which adds a low visibility restraint option and adds additional rigidity to the belt when carried. The BIG-G LINER BELT has gross adjustment via the fixed G-hook and a series of loops in a strip of 1″webbing. The fixed G-hook will never fail to hold your pants up even after years of abusing the Loop Velcro or in standalone EDC usage. It also features a less aggressive hook on the “G” for those times you have to drop trou fast… #CurryHurry. Available in Tan, Black, OD, Ranger Green, or Wolf.
The LITTLE-G LINER BELT was designed to be the level “0” belt in our SALT Belt System. In addition, it also works perfectly as a daily use belt for EDC or in-uniform. The LITTLE-G LINER BELT is made from 1.75″ Type 13 webbing, which is stiff enough to support holsters & other items, but soft enough to be comfortable when worn daily. The belt has 4 subtle channels that allow for the carry of large zip-ties for a low visibility restraint option that also adds some additional rigidity to the belt when they are carried. The Belt has two levels of adjustment; a gross adjustment with one of five G-Hook slots (adjusts in one inch increments) and a fine adjustment (web slider that anchors to using hook and loop). The ease of adjustment allows you to quickly adjust tightness to accommodate IWB pistol carry or to quickly tighten your SALT Belt. Available in Tan or Black.
The NON-METALLIC LINER BELT was designed to be the level “0” belt in our SALT belt system. In addition, it also works perfectly as a daily use belt for EDC or in-uniform. The NON-METALLIC LINER BELT is made from 1.75″ Type 13 webbing, which is stiff enough to support holsters & other items, but soft enough to be comfortable when worn daily. The belt has 4 subtle channels that allow for the carry of large zip-ties for a low visibility restraint option that also adds some additional rigidity to the belt when they are carried. The belt has fine adjustment via the 1″ web tension strap that anchors with hook velcro to the loop Velcro on the body of the belt. The ease of adjustment allows you to quickly adjust tightness to accommodate IWB pistol carry or to quickly tighten your SALT Belt. Available in Tan, Black, OD, Ranger Green, or Wolf Gray
Nicholas B. –
This belt hits a happy medium between a full on padded war belt and a outer gun belt. The laser cut panels make scaling the belt very fast and easy. Molle pouches attach very easily because you can undo the panel while you thread pouches on. The padding and Velcro flap that wraps around adds perfect amount of standoff significantly reducing interference between belt kit and armor. Alex
Nicholas B. –
I’ve used a padded belt (the HSGI laser cut) before, including a physical 2-gun match that exposed issues with that setup, and this belt solves all my issues with it. Changing whether I use the belt or PALS on a section in the HSGI is a matter of 4 hands and a lot of brute force, while on this belt it might be as much as 30 seconds working with velcro. The hardest part of working with this belt is threading things onto the belt itself over the buckle. Reconfiguring it is vastly easier. The materials used are solid, the stitching is very heavy duty, and overall the build quality is excellent.
As far as use goes, the padded belt had problems with riding up in my use and flopping around once out of place. This belt doesn’t have that problem, but it is still padded and thick enough to carry a good amount of weight without significant issue. I think it’s the current best option for a PALS compatible belt on the market if concealment isn’t an issue. Rick
Nicholas B. –
I have used a lot of different war belts over the years, both professionally and just for training. I have been using a Brokos belt for the last few years and bought this for training. This is my new favorite belt. It’s as low profile as padded belts get but the inner and outer belt idea is a great thing to have in a tactical belt. It’s one of the features I have always loved in my competition rigs and gives a good secure grip without the extra tight feeling. The flap system is also so much easier than having to take a belt completely apart just to change out a holster or pouch. I have used this belt on multiple trainings now and several people have purchased this belt after seeing mine. I can’t wait to see what else these guys come up with. Keep up the great work. Kyle